Lexmark MB2338 Service Manual

Entering the Service Engineer (SE) menu
To access the Service Engineer (SE) menu:
1 Turn on the printer.
2 When the home screen appears, press * * 411 on the control panel.
For 2‑line control panels, press the right arrow button twice, press OK, and then press the left arrow button.
General SE
This setting allows you to save a log file to a USB drive.
Enter the Service Engineer (SE) menu, and then navigate to:
General SE > Capture Logs to USB Drive
Network SE
Enter the Service Engineer (SE) menu, and then touch Network SE.
Note: Use these settings as directed by the next level of support.
Top level menu Intermediate menu
Print SE Menus Print SE Menus
History
• Print History
• Mark History
MAC
• Set Card Speed
• LAA
• Keep Alive
NPAP Print Alerts
TCP/IP
• netstat
• arp
• Allow SNMP Set
• MTU
• Meditech Mode
• RAW LPR Mode
Wireless Enable Wi‑Fi Direct Sigma Control Agent
Ping Test
• Ping
• Ping6
Other Actions
• ifconfig
• IPtables [Firewall Dump]
• IP6tables [Firewall Dump]
• IPsec Dump
7017-2xx, -4xx, -6xx
Service menus
184

Lexmark MB2338 Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Scan Technology	CIS
Scan Resolution	Up to 600 x 600 dpi
Fax Capability	Yes
Fax Speed	33.6 Kbps
Print Speed	38 ppm
Copy Speed	Up to 23 cpm
Standard Connectivity	USB, Ethernet
Monthly Duty Cycle	50000 pages
Processor Speed	1 GHz
Paper Input Capacity	250 sheets
Paper Output Capacity	150 pages
Media Sizes Supported	A4, A5, A6, Letter
Scan Type	Flatbed, ADF
Supported Operating Systems	Windows, Mac OS, Linux