Lexmark MC3224 User Manual

Menu item Description
Enable BOOTP
O*
On
Allow the BOOTP to assign a printer IP address.
Restricted Server List Specify an IP address for the TCP connections.
Notes:
• This menu item appears only in the Embedded Web Server.
• Use a comma to separate each IP address.
• You can add up to 50 IP addresses.
Restricted Server List Options
Block All Ports*
Block Printing Only
Block Printing and HTTP Only
Specify how the IP addresses in the list can access the printer functionality.
Note: This menu item appears only in the Embedded Web Server.
MTU Specify a maximum transmission unit (MTU) parameter for the TCP connections.
Raw Print Port
1–65535 (9100*)
Specify a raw port number for printers connected on a network.
Outbound Trac Maximum
Speed
Disabled*
Enabled
Enable the printer maximum transfer rate.
Enable TLSv1.0
On*
O
Enable the TLSv1.0 protocol.
Enable TLSv1.1
On*
O
Enable the TLSv1.1 protocol.
SSL Cipher List Specify the cipher algorithms to use for the SSL or the TLS connections.
Note: An asterisk (*) next to a value indicates the factory default setting.
SNMP
Note: This menu appears only in network printers or printers that are attached to print servers.
Use printer menus 126

Lexmark MC3224 Specifications

General

Print Technology	Color Laser
Print Speed (A4, Black)	22 ppm
Print Speed (A4, Color)	22 ppm
Print Resolution	600 x 600 dpi
Maximum Copy Speed (A4, Black)	22 cpm
Maximum Copy Speed (A4, Color)	22 cpm
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Standard Connectivity	USB, Ethernet, Wi-Fi
Standard Input Capacity	250 sheets
Standard Output Capacity	100 sheets
Monthly Duty Cycle	Up to 30, 000 pages
Duplex Printing	Yes
Display	2.8-inch color touch screen
Processor Speed	800 MHz
Memory	512 MB
Operating Systems	Windows, Mac, Linux
Scan Type	Flatbed
Fax Resolution	300 x 300 dpi
Mobile Printing	AirPrint
Scan Resolution	600 x 600 dpi