Lexmark MC3224 User Manual

Fax
Using the automatic document feeder and scanner glass
Automatic document feeder (ADF) Scanner glass
Note: The ADF is available only in some printer models.
• Use the ADF for multiple‑page or two-sided
documents.
• Load an original document faceup. For multiple‑page
documents, make sure to align the leading edge
before loading.
• Make sure to adjust the ADF guides to match the width
of the paper that you are loading.
• Use the scanner glass for single‑page documents,
book pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media
(such as magazine clippings).
• Place the document facedown in the corner with the
arrow.
Sending a fax
Note: Make sure that fax is
configured.
For more information, see “Setting up the printer to fax” on page 24.
Using the control panel
1 Load an original document into the ADF tray or on the scanner glass.
2 From the home screen, touch Fax, and then enter the needed information.
If necessary, adjust the settings.
3 Send the fax.
Using the computer
Before you begin, make sure that the fax driver is installed. For more information, see “Installing the fax driver”
on page 45.
For Windows users
1
From the document that you are trying to fax, open the Print dialog.
2 Select the printer, and then click Properties, Preferences, Options, or Setup.
Fax 66

Lexmark MC3224 Specifications

General

Print Technology	Color Laser
Print Speed (A4, Black)	22 ppm
Print Speed (A4, Color)	22 ppm
Print Resolution	600 x 600 dpi
Maximum Copy Speed (A4, Black)	22 cpm
Maximum Copy Speed (A4, Color)	22 cpm
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Standard Connectivity	USB, Ethernet, Wi-Fi
Standard Input Capacity	250 sheets
Standard Output Capacity	100 sheets
Monthly Duty Cycle	Up to 30, 000 pages
Duplex Printing	Yes
Display	2.8-inch color touch screen
Processor Speed	800 MHz
Memory	512 MB
Operating Systems	Windows, Mac, Linux
Scan Type	Flatbed
Fax Resolution	300 x 300 dpi
Mobile Printing	AirPrint
Scan Resolution	600 x 600 dpi