Lexmark MC3224 User Manual

• Do not load too much paper. Make sure that the stack height is below the maximum paper fill indicator.
• Do not slide paper into the tray. Load paper as shown in the illustration.
• Make sure that the paper guides are positioned correctly and are not pressing tightly against the paper or
envelopes.
• Push the tray firmly into the printer after loading paper.
Use recommended paper
•
Use only recommended paper or specialty media.
• Do not load paper that is wrinkled, creased, damp, bent, or curled.
• Flex, fan, and align the paper edges before loading.
• Do not use paper that has been cut or trimmed by hand.
• Do not mix paper sizes, weights, or types in the same tray.
• Make sure that the paper size and type are set correctly on the computer or printer control panel.
• Store paper according to manufacturer recommendations.
Identifying jam locations
Notes:
• When Jam Assist is set to On, the printer might attempt to flush blank pages or pages with partial prints
after clearing the jam. Check your printed output for blank pages.
• When Jam Recovery is set to On or Auto, the printer reprints jammed pages.
Troubleshoot a problem 199

Lexmark MC3224 Specifications

General

Print Technology	Color Laser
Print Speed (A4, Black)	22 ppm
Print Speed (A4, Color)	22 ppm
Print Resolution	600 x 600 dpi
Maximum Copy Speed (A4, Black)	22 cpm
Maximum Copy Speed (A4, Color)	22 cpm
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Standard Connectivity	USB, Ethernet, Wi-Fi
Standard Input Capacity	250 sheets
Standard Output Capacity	100 sheets
Monthly Duty Cycle	Up to 30, 000 pages
Duplex Printing	Yes
Display	2.8-inch color touch screen
Processor Speed	800 MHz
Memory	512 MB
Operating Systems	Windows, Mac, Linux
Scan Type	Flatbed
Fax Resolution	300 x 300 dpi
Mobile Printing	AirPrint
Scan Resolution	600 x 600 dpi