Lexmark MC3224 User Manual

Can send but not receive faxes using analog fax
Action Yes No
Step 1
Make sure that the paper source is not empty.
Can you receive faxes?
The problem is
solved.
Go to step 2.
Step 2
Check the ring count delay settings.
From the home screen, touch Settings > Fax > Fax Setup > Fax
Receive Settings > Rings to Answer.
Can you receive faxes?
The problem is
solved.
Go to step 3.
Step 3
If the printer is printing blank pages, then see
“Blank or white
pages” on page 167.
Can you receive faxes?
The problem is
solved.
Contact
customer
support.
Poor fax print quality
Action Yes No
Step 1
Make sure that there are no print quality defects.
a From the control panel, touch Settings > Troubleshooting >
Print Quality Test Pages.
b Correct any print quality defects. For more information, see
“Print quality is poor” on page 167.
Is the fax print quality satisfactory?
The problem is
solved.
Go to step 2.
Step 2
Decrease the incoming fax transmission speed.
a From the control panel, touch Settings > Fax > Fax Setup > Fax
Receive Settings > Admin Controls.
b In the Max Speed menu, select a lower transmission speed.
Is the fax print quality satisfactory?
The problem is
solved.
Contact
customer
support.
Troubleshoot a problem 217

Lexmark MC3224 Specifications

General

Print Technology	Color Laser
Print Speed (A4, Black)	22 ppm
Print Speed (A4, Color)	22 ppm
Print Resolution	600 x 600 dpi
Maximum Copy Speed (A4, Black)	22 cpm
Maximum Copy Speed (A4, Color)	22 cpm
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Standard Connectivity	USB, Ethernet, Wi-Fi
Standard Input Capacity	250 sheets
Standard Output Capacity	100 sheets
Monthly Duty Cycle	Up to 30, 000 pages
Duplex Printing	Yes
Display	2.8-inch color touch screen
Processor Speed	800 MHz
Memory	512 MB
Operating Systems	Windows, Mac, Linux
Scan Type	Flatbed
Fax Resolution	300 x 300 dpi
Mobile Printing	AirPrint
Scan Resolution	600 x 600 dpi