Lexmark MC3326 User Manual

Connected to dierent wall jacks
1 Connect one end of the telephone cable to the line port of the printer.
2 Connect the other end of the cable to an active analog wall jack.
Notes:
• If you have only one telephone number on your line, then set the printer to receive faxes automatically.
• Set the printer to pick up calls two rings after the answering machine. For example, if the answering
machine picks up calls after four rings, then set the printer Rings to Answer setting to 6.
Setting up fax in countries or regions with
dierent
telephone wall jacks
and plugs
Note: These instructions apply only to printers that support analog fax. For more information, see “Supported
fax” on page 24.
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not set up this product or make
any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a
lightning storm.
Set up, install, and configure 29

Lexmark MC3326 Specifications

General

Print Speed (A4, Black)	24 ppm
Print Speed (A4, Color)	24 ppm
Print Speed (Letter, Black)	26 ppm
Print Speed (Letter, Color)	26 ppm
Standard Paper Input	250 sheets
Standard Memory	512 MB
Recommended Monthly Page Volume	600 - 2500 pages
Maximum Monthly Duty Cycle	50, 000 pages
Duplex Printing	Yes
Scan Technology	CIS
Functions	Print, Copy, Scan, Fax
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Print Technology	Color Laser
Processor Speed	1 GHz
Connectivity	USB, Ethernet, Wi-Fi
Display	2.8-inch
Scan Resolution	600 x 600 dpi
Copy Speed	24 cpm