Lexmark MC3326 User Manual

CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not use the fax feature during a
lightning storm.
CAUTION—POTENTIAL INJURY: To reduce the risk of fire, use only a 26 AWG or larger
telecommunications (RJ-11) cord when connecting this product to the public switched telephone
network. For users in Australia, the cord must be approved by the Australian Communications and Media
Authority.
The standard wall jack adopted by most countries or regions is RJ‑11. If the wall jack or equipment in your facility
is not compatible with this type of connection, then use a telephone adapter. An adapter for your country or
region may not come with your printer, and you may need to purchase it separately.
There may be an adapter plug installed in the telephone port of the printer. Do not remove the adapter plug
from the telephone port of the printer if you are connecting to a serial or cascaded telephone system.
Part name Part number
Lexmark adapter plug 40X8519
Set up, install, and configure 30

Lexmark MC3326 Specifications

General

Print Speed (A4, Black)	24 ppm
Print Speed (A4, Color)	24 ppm
Print Speed (Letter, Black)	26 ppm
Print Speed (Letter, Color)	26 ppm
Standard Paper Input	250 sheets
Standard Memory	512 MB
Recommended Monthly Page Volume	600 - 2500 pages
Maximum Monthly Duty Cycle	50, 000 pages
Duplex Printing	Yes
Scan Technology	CIS
Functions	Print, Copy, Scan, Fax
Copy Resolution	600 x 600 dpi
Fax Speed	33.6 Kbps
Print Technology	Color Laser
Processor Speed	1 GHz
Connectivity	USB, Ethernet, Wi-Fi
Display	2.8-inch
Scan Resolution	600 x 600 dpi
Copy Speed	24 cpm