Lexmark MS622 User Guide

Upgrading and migrating
Hardware
Available internal options
• Flash memory
• Font cards
• Firmware cards
– Forms and Bar Code
– IPDS
– PRESCRIBE
• Internal solutions port
– RS-232C Serial Interface Card
– Thin Parallel
Accessing the controller board
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer o, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them o as well, and unplug any cables going into the
printer.
1 Turn
o
the printer.
2 Unplug the power cord from the electrical outlet, and then from the printer.
3 Using a flat-head screwdriver, open the controller board access cover.
Warning—Potential Damage: Controller board electronic components are easily damaged by static
electricity. Touch a metal surface on the printer before touching any controller board components or
connectors.
Upgrading and migrating 155

Lexmark MS622 Specifications

General

Print Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 175, 000 pages
Print Technology	Laser
Input Capacity	Up to 650 sheets
Output Capacity	250 pages
Processor Speed	1 GHz
Memory	512 MB
Connectivity	USB, Ethernet, Optional Wireless
Recommended Monthly Page Volume	2, 000 - 20, 000 pages
Media Sizes Supported	A4, A5, A6, Legal, Letter, Executive
Supported Operating Systems	Windows, macOS, Linux
Duplex Printing	Standard