Device
Preferences
Menu item Description
Display Language
[List of languages]
Set the language of the text that appears on the display.
Note: Not all languages are available for all printer models.
You may need to install special hardware for some
languages.
Country/Region
[List of countries]
Specify the printer location.
Run Initial Setup
O*
On
Run the setup wizard.
Keyboard Type
[List of languages]
Select a language as a keyboard type.
Note: All the Keyboard Type values may not appear or may
require special hardware to appear.
Displayed information
Display Text 1 [IP Address*]
Display Text 2 [Date/Time*]
Custom Text 1
Custom Text 2
Specify the information to display on the home screen.
Date and Time
Configure
Current Date and Time
Manually Set Date and Time
Date Format [MM‑DD‑YYYY*]
Time Format [12 hour A.M./P.M.*]
Time Zone [GMT*]
Network Time Protocol
Enable NTP
NTP Server
Enable Authentication
Key ID
Password
Format the printer date and time.
Date and Time
Network Time Protocol
Enable NTP [On*]
NTP Server
Enable Authentication
Configure the settings for Network Time Protocol (NTP).
Note: When Enable Authentication is set to MD5 key, Key ID
and Password appear.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 38
To Next Page
Loading...
Need help?
General
