Lexmark MS622

Menu item Description
Default Print Permission Login Set the login credentials that allow users to print.
Note: This menu item appears only in some printer models.
Security Reset Jumper
Enable “Guest” access*
No Eect
Specify the eect of using the security reset jumper.
Notes:
• The jumper is located beside a lock icon on the controller board.
• Enable “Guest” access provides guests with full access control.
• No Eect means that the reset has no eect on the printer security
configuration.
Minimum Password Length
0–32 (0*)
Specify the minimum characters allowed for a password.
Show Log Out Confirmation
O
On*
Show or hide the logout confirmation prompt.
Note: An asterisk (*) next to a value indicates the factory default setting.
Reports
Menu Settings Page
Menu item Description
Menu Settings Page Print a report that contains the printer preferences, settings, and configurations.
Device
Menu item Description
Device Information Print a report that contains information about the printer.
Device Statistics Print a report about printer usage and supply status.
Profiles List Print a list of profiles that are stored in the printer.
Print
Menu item Description
Print Fonts
PCL Fonts
PS Fonts
Print a list of supported fonts.
Understanding the printer menus 81