Lexmark Confidential
7
200.19, 242.xx Paper Jam when Feeding from Tray 2
• A combination of parts at the high and low end of the specification
range can result in tray 2 being misaligned with the printer reference
edge.
• Printing on A5, A6, statement and legal media will be more
susceptible to this issue.
• To fix the problem, ensure that the media being used is supported and
loaded properly:
– Set side restraints
– fan media
– flip media
• Best solution would be to load difficult media in a different tray.
Note: A change is in process to reduce/eliminate the problem.
To Next Page
Loading...
