Lexmark MS811dn - Page 46

= Supported
X = Not supported
Printer model
Message Status code Return string
MS710, MS711,
MS810, MS811,
MS812
MX710, MX711
MX810, MX811,
MX812
Intervention Required
-
Insufficient Memory
30016
Insufficient
memory, some
Held Jobs were
deleted [37]
Memory low, some
held jobs lost
[37]
*
XXX
Intervention Required
-
Insufficient
Defragment Memory
30016
Insufficient
memory, some
Held Jobs were
deleted [37]
Intervention Required
-
Insufficient
Defragment Memory
30016
Insufficient
memory, some
Held Jobs will
not be restored
[37]
XXX
Intervention Required
-
Insufficient
Defragment Memory
30016
Insufficient
memory for Flash
Memory
Defragment
operation [37]
Cannot defrag
flash memory
[37]
*
XXX
Intervention Required
-
Insufficient Collation
Area
30016
Insufficient
memory to
collate job [37]
Cannot collate
large document
[37]
*
XXX
Intervention Required
-
Memory Full
30016
Memory full [38]
Intervention Required
-
Configuration Change
30016
Configuration
Change [57]
XXX
Intervention Required
-
Held Jobs May Not Be
Restored (57
Configuration Change)
30016
Configuration
change, some
held jobs were
not restored
[57]
XXX
Intervention Required
-
Held Jobs May Not Be
Restored
30016
Held Jobs May
Not Be Restored
XXX
* This message applies only to two‑line printer models.
Appendix B: PJL support 46