Loading paper and specialty
media
Loading the 250‑ or 550‑sheet tray
CAUTION—POTENTIAL INJURY: To reduce the risk of
equipment instability, load each tray separately. Keep all other
trays closed until needed.
1 Pull out the tray.
Notes:
• When loading folio‑, legal‑, or Oficio‑size paper, lift the tray
slightly and then pull it out completely.
• Do not remove trays while a job prints or while Busy
appears on the display. Doing so may cause a jam.
2 Squeeze and slide the width guide to the correct position for the
size of the paper being loaded until it clicks into place.
Note: Use the paper size indicators at the bottom of the tray to
help position the guides.
12
To Next Page
Loading...
