Action Yes No
Step 2
a Remove any packing material that is left on the imaging unit.
1 Remove the toner cartridge, and then remove the imaging
unit.
Warning—Potential Damage: Do not expose the imaging
unit to direct light for more than 10 minutes. Extended
exposure to light may cause print quality problems.
Warning—Potential Damage: Do not touch the
photoconductor drum under the imaging unit. Doing so
may aect the quality of future print jobs.
2 Check the imaging unit for signs of damage.
Note: Make sure that the photoconductor drum contact is
not bent or out of place.
3 Firmly shake the imaging unit to redistribute the toner.
4 Insert the imaging unit, and then insert the toner cartridge.
b Print the document.
Is the printer printing blank or white pages?
Go to step 3. The problem is
solved.
Step 3
Check the status of the toner cartridge, and replace if necessary.
a From the control panel, navigate to
Status/Supplies > Supplies
b Print the document.
Is the printer printing blank or white pages?
Go to step 4. The problem is
solved.
Step 4
Check the transfer roller for proper installation.
Is the transfer roller installed properly?
Contact
customer
support.
Go to step 5.
Step 5
a Remove, and then insert the transfer roller.
b Print the document.
Is the printer printing blank or white pages?
Contact
customer
support.
The problem is
solved.
Dark print
Troubleshooting 155
To Next Page
Loading...
