5 Install the mailbox on the printer.
• A maximum of three mailboxes may be configured with the printer.
• If configured with the output expander, then the mailbox and output expander may be installed in any
order.
6 Connect the power cord to the printer, and then to the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
7 Turn on the printer.
Add the mailbox in the print driver to make it available for print jobs. For more information, see “Adding
available options in the print driver” on page 208.
Upgrading and migrating 200
To Next Page
Loading...
