5 Install the finisher on the printer.
The finisher must not be combined with any other output options.
6 Connect the power cord to the printer, and then to the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
7 Turn on the printer.
Add the
finisher
in the print driver to make it available for print jobs. For more information, see “Add ing
available options in the print driver” on page 208.
Upgrading and migrating 206
To Next Page
Loading...
