What to do if Lexmark MX610 displays 'Imaging unit very low, [x] estimated pages remain [84.xy]'?
This message means you may need to replace the imaging unit very soon. If necessary, touch Continue on the printer control panel to clear the message and continue printing.
What to do if Lexmark All in One Printer displays 'Imaging unit nearly low [84.xy]'?
If necessary, touch Continue on the printer control panel to clear the message and continue printing.
What does 'Insufficient memory, some held jobs will not be restored [37]' mean on Lexmark MX610?
From the printer control panel, touch Continue to clear the message or delete other held jobs to free up additional printer memory.
What does 'Configuration change, some held jobs were not restored [57]' mean on Lexmark MX610 and how to clear it?
From the printer control panel, touch Continue to clear the message.
What does 'Error reading USB hub. Remove hub.' mean on Lexmark All in One Printer?
This means that an unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.
What does 'Insufficient memory for Flash Memory Defragment operation [37]' mean on Lexmark MX610?
From the printer control panel, touch Continue to stop the defragmentation and continue printing. Alternatively, delete fonts, macros, and other data in the printer memory, or install additional printer memory.
What to do if Lexmark MX610 All in One Printer displays 'Check tray [x] connection'?
First, turn the printer off and then back on. If the error persists: 1. Turn off the printer. 2. Unplug the power cord. 3. Remove and reattach the indicated tray. 4. Reconnect the power cord and turn the printer back on. If the error continues, repeat steps 1-3, and then contact customer support. You can also touch Continue on the printer control panel to clear the message and resume the job.
What to do if Lexmark MX610 says 'Memory full [38]'?
To resolve a memory full error, you can either touch Cancel job on the printer control panel to clear the message, or install additional printer memory.
How to resolve 'Maintenance kit low [80.xy]' on Lexmark All in One Printer?
You may need to order a maintenance kit. If necessary, touch Continue to clear the message and continue printing.
What to do if Lexmark MX610 All in One Printer displays 'Cartridge, imaging unit mismatch [41.xy]'?
Check if both the toner cartridge and imaging unit are Lexmark-authorized MICR (magnetic ink character recognition) supplies or non-MICR supplies. Change the toner cartridge or imaging unit so that both are Lexmark-authorized MICR supplies or non-MICR supplies.
General| Brand | Lexmark |
|---|---|
| Model | MX610 Series |
| Category | All in One Printer |
| Language | English |
Instructions and considerations for choosing an appropriate location for the printer, including ventilation and stability.
Step-by-step instructions on how to properly load paper into the printer trays.
Steps for printing documents directly from a USB flash drive or mobile device.
Initial setup steps for enabling the printer's e-mail functionality.
Steps to create shortcuts for e-mail recipients using the Embedded Web Server or control panel.
Instructions on how to scan and e-mail documents using different methods.
Initial setup and connection methods for the printer's fax functionality.
Scenarios and instructions for connecting the printer to different types of telephone lines.
Various methods for sending faxes using the printer.
Instructions for scanning documents to network destinations.
Methods for scanning documents directly to an FTP server.
Scanning documents directly to a computer or a flash drive.
Settings related to paper handling, including default source and size/type.
Configuration settings for network and port connections.
Options for securing the printer, including access controls and password settings.
Settings for establishing wireless network connections and security.
Configuring security settings such as backup passwords and building blocks.
Procedures for erasing temporary data files from the printer hard disk.
Options to restore printer settings to factory defaults.
Options for customizing copy jobs, including content type, paper saver, and collate.
Settings for login restrictions, security jumpers, and factory default resets.
Configuring TCP/IP settings like hostname, IP address, and gateway.
Configuring settings for the SMTP server for e-mail functionality.
Settings for confidential print jobs, including PIN limits and expiration.
Suggestions for reducing paper and toner consumption.
Configuring Eco-Mode settings to reduce energy consumption.
Configuring the printer's sleep mode timeout.
Understanding and configuring the printer's ultra-low power Hibernate mode.
Methods for securely disposing of a printer hard disk.
Steps to erase non-volatile memory and settings using the Wipe All Settings option.
Steps to enable hard disk encryption via the Embedded Web Server.
Instructions for cleaning the exterior and interior parts of the printer.
Steps to clean the scanner glass and ADF glass for better image quality.
Information on how to order printer supplies like toner and imaging units.
Detailed procedures for replacing consumables like toner and imaging units.
Step-by-step guide for replacing the toner cartridge.
Instructions for replacing the printer's imaging unit.
Procedures for resetting printer settings to factory defaults.
Tips and best practices to prevent paper jams in the printer.
How to interpret jam messages and identify jam locations within the printer.
Step-by-step instructions for clearing jams in the automatic feeder top cover.
Instructions for clearing jams from the standard paper bin.
Steps for clearing paper jams by opening the printer's rear door.
Instructions for clearing jams from a specific tray [x].
Instructions for clearing jams by opening the printer's front door.
How to clear jams from the output bin, specifically for the finisher.
How to clear jams related to tray 1 and the duplexer.
Steps for clearing paper jams from the manual feeder.
Explains common printer messages and their meanings.
Troubleshooting for issues related to installed printer options, like not being detected.
Solutions for various print job issues, including multi-language PDF problems.
General guide to solving common printer issues.
Steps to resolve issues with printer trays, including recognition and paper loading.
Solutions for common paper feeding issues, especially frequent paper jams.
Troubleshooting steps for fundamental printer issues, like unresponsiveness.
How to clear persistent paper jam messages.
Solutions for jobs printing from incorrect trays or on wrong paper types.
Steps to resolve issues where the printer display is blank.
Comprehensive guide for troubleshooting print jobs that do not print.
General guide to resolving various print quality issues.
Troubleshooting steps for printers that output blank pages.
How to fix issues causing the printer to output solid black pages.
Steps to resolve prints that are too dark.
Steps to resolve prints that are too light.
Troubleshooting steps when the copier function is unresponsive.
Comprehensive guide to addressing poor copy quality.
Initial setup procedures for fax and e-mail functions.
Detailed guide for resolving issues with sending or receiving faxes.
Troubleshooting steps when the printer can send but not receive faxes.
Resolving issues where the printer can receive but not send faxes.
Troubleshooting steps when the scanner is unresponsive.
Comprehensive guide to improving scanned image quality.
Steps to resolve issues where the Embedded Web Server fails to open.
Details of the limited warranty for Lexmark printers.
To Next Page
