What to do if Lexmark MX610 displays 'Fax Station Number not set up. Contact system administrator.'?
From the printer control panel, touch Continue to clear the message. Complete the Analog Fax setup.
What to do if Lexmark MX610 displays 'Fax Station Name not set up. Contact system administrator.'?
From the printer control panel, touch Continue to clear the message. Complete the Analog Fax setup.
What to do if Lexmark All in One Printer displays 'Fax server 'To Format' not set up. Contact system administrator.'?
From the printer control panel, touch Continue to clear the message. Complete the Fax Server setup.
What to do if Lexmark All in One Printer displays 'Fax partition inoperative. Contact system administrator.'?
From the printer control panel, touch Continue to clear the message. If the message appears again, turn off the printer, and then turn it back on.
What to do if Lexmark MX610 displays 'Fax memory full'?
From the printer control panel, touch Continue to clear the message.
What does 'Error reading USB hub. Remove hub.' mean on Lexmark All in One Printer?
This means that an unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.
What does 'Error reading USB drive. Remove USB.' mean on Lexmark MX610 All in One Printer?
This indicates that an unsupported USB device is inserted. Remove the USB device, and then insert a supported one.
What to do if Lexmark MX610 All in One Printer displays 'Disk near full. Securely clearing disk space.'?
Touch Continue to clear the message and continue printing. You can also delete fonts, macros, and other data stored on the printer hard disk, or install a hard disk with higher capacity.
What to do if Lexmark MX610 All in One Printer displays 'Disk must be formatted for use in this device'?
From the printer control panel, touch Format disk to format the printer hard disk and clear the message.
How to fix scanner jam on Lexmark All in One Printer?
To resolve a scanner jam, remove the jammed paper from the scanner.
General| Brand | Lexmark |
|---|---|
| Model | MX610 Series |
| Category | All in One Printer |
| Language | English |
Instructions and considerations for choosing an appropriate location for the printer, including ventilation and stability.
Step-by-step instructions on how to properly load paper into the printer trays.
Steps for printing documents directly from a USB flash drive or mobile device.
Initial setup steps for enabling the printer's e-mail functionality.
Steps to create shortcuts for e-mail recipients using the Embedded Web Server or control panel.
Instructions on how to scan and e-mail documents using different methods.
Initial setup and connection methods for the printer's fax functionality.
Scenarios and instructions for connecting the printer to different types of telephone lines.
Various methods for sending faxes using the printer.
Instructions for scanning documents to network destinations.
Methods for scanning documents directly to an FTP server.
Scanning documents directly to a computer or a flash drive.
Settings related to paper handling, including default source and size/type.
Configuration settings for network and port connections.
Options for securing the printer, including access controls and password settings.
Settings for establishing wireless network connections and security.
Configuring security settings such as backup passwords and building blocks.
Procedures for erasing temporary data files from the printer hard disk.
Options to restore printer settings to factory defaults.
Options for customizing copy jobs, including content type, paper saver, and collate.
Settings for login restrictions, security jumpers, and factory default resets.
Configuring TCP/IP settings like hostname, IP address, and gateway.
Configuring settings for the SMTP server for e-mail functionality.
Settings for confidential print jobs, including PIN limits and expiration.
Suggestions for reducing paper and toner consumption.
Configuring Eco-Mode settings to reduce energy consumption.
Configuring the printer's sleep mode timeout.
Understanding and configuring the printer's ultra-low power Hibernate mode.
Methods for securely disposing of a printer hard disk.
Steps to erase non-volatile memory and settings using the Wipe All Settings option.
Steps to enable hard disk encryption via the Embedded Web Server.
Instructions for cleaning the exterior and interior parts of the printer.
Steps to clean the scanner glass and ADF glass for better image quality.
Information on how to order printer supplies like toner and imaging units.
Detailed procedures for replacing consumables like toner and imaging units.
Step-by-step guide for replacing the toner cartridge.
Instructions for replacing the printer's imaging unit.
Procedures for resetting printer settings to factory defaults.
Tips and best practices to prevent paper jams in the printer.
How to interpret jam messages and identify jam locations within the printer.
Step-by-step instructions for clearing jams in the automatic feeder top cover.
Instructions for clearing jams from the standard paper bin.
Steps for clearing paper jams by opening the printer's rear door.
Instructions for clearing jams from a specific tray [x].
Instructions for clearing jams by opening the printer's front door.
How to clear jams from the output bin, specifically for the finisher.
How to clear jams related to tray 1 and the duplexer.
Steps for clearing paper jams from the manual feeder.
Explains common printer messages and their meanings.
Troubleshooting for issues related to installed printer options, like not being detected.
Solutions for various print job issues, including multi-language PDF problems.
General guide to solving common printer issues.
Steps to resolve issues with printer trays, including recognition and paper loading.
Solutions for common paper feeding issues, especially frequent paper jams.
Troubleshooting steps for fundamental printer issues, like unresponsiveness.
How to clear persistent paper jam messages.
Solutions for jobs printing from incorrect trays or on wrong paper types.
Steps to resolve issues where the printer display is blank.
Comprehensive guide for troubleshooting print jobs that do not print.
General guide to resolving various print quality issues.
Troubleshooting steps for printers that output blank pages.
How to fix issues causing the printer to output solid black pages.
Steps to resolve prints that are too dark.
Steps to resolve prints that are too light.
Troubleshooting steps when the copier function is unresponsive.
Comprehensive guide to addressing poor copy quality.
Initial setup procedures for fax and e-mail functions.
Detailed guide for resolving issues with sending or receiving faxes.
Troubleshooting steps when the printer can send but not receive faxes.
Resolving issues where the printer can receive but not send faxes.
Troubleshooting steps when the scanner is unresponsive.
Comprehensive guide to improving scanned image quality.
Steps to resolve issues where the Embedded Web Server fails to open.
Details of the limited warranty for Lexmark printers.
To Next Page
