September 14, 2018
• 41X1219 FRU PN was changed to 41X2605 on the MPF and standard tray Parts catalog.
August 17, 2018
• Model information was added to the 41X2439 FRU on the Control panel parts catalog.
August 2, 2018
• Date security notice was updated.
• Software CD and Smart card were added to the Miscellaneous Parts catalog.
July 6, 2018
• Covers parts catalog was revised.
May 21, 2018
• 4yy paper jams section was revised.
May 4, 2018
• Multifeed calibration was removed from the Scanner diagnostics menu.
• Controller calibration description was updated.
• An installation note for performing Controller calibration was added to the Flatbed scanner removal.
• For the right cover removal, an image was added showing how to open the controller board access cover.
• Printhead assembly adjustment was updated to include a note referring to the Registration adjust procedure.
• Scanner rear cover FRU (41X2501) was added to the Covers parts catalog.
April 27, 2018
• Reference to print defects guide on the Repeating defects check was removed.
• Reference to second transfer roller on the Enable edge-to-edge (printing) was removed.
• Image for Printhead removal was revised.
7018
Change history
19
To Next Page
