Paper type Tray Multipurpose feeder ADF Two‑sided printing
Envelopes N/A N/A
60–216 g/m
2
(16–58 lb)
N/A
* One‑sided paper labels designed for laser printers are supported for occasional use. It is recommended to print
20 or fewer pages of paper labels per month. Vinyl, pharmacy, and two‑sided labels are not supported.
Tools required for service
• Flat-blade screwdrivers, various sizes
• #1 Phillips screwdriver, magnetic
• #2 Phillips screwdriver, magnetic
• #2 Phillips screwdriver, magnetic short-blade
• Torx screwdriver (T20 head)
• Needle‑nose pliers
• Diagonal side cutters
• Spring hook
• Feeler gauges
• Analog or digital multimeter
• 3‑mm ball hex wrench
• Tone r vacuu m
• Flashlight
7018
General information
26
To Next Page
