Transfer roller removal
For a video demonstration, see Transfer roller removal.
1 Open the front door.
2 Release the two latches (A) on each end of the transfer roller.
3 Remove the roller.
Note: For a video demonstration, see
Transfer roller removal at infoserve.lexmark.com/ids/sma.
Jam access cover removal
1 Open the front door.
2 Remove the screw (A), and then release the cable from the jam access cover.
3 Push down, and then pull the two ends (B) of the springs to remove them.
4 Repeat step 3 for the other side.
5 Release the two latches (C).
6 Remove the clip (D).
Note: Some models do not have the clip (D) installed.
7018
Parts removal
264
To Next Page
Loading...
