4 Gently flex the right bracket and detach the right side of the MPF tray.
5 Raise the MPF tray to a vertical position, and detach it from the machine.
Sensor (input) removal
1 Remove the left cover. See “Left cover removal (MX71x)” on page 416.
2 Remove the controller board access shield. See “Controller board access shield removal” on page 424.
3 Remove the media tray. See “Media tray removal” on page 538.
4 Remove the front door. See “Front door removal” on page 453.
5 Remove the toner cartridge.
6 Remove the imaging unit.
7463
Repair information
473
To Next Page
Loading...
