• Binding—This specifies if the original document is bound on the long‑edge or short‑edge side.
Using the advanced options
Select from the following settings:
• Advanced Imaging—This adjusts the Background Removal, Color Balance, Color Dropout, Contrast, JPEG Quality, Mirror
Image, Negative Image, Scan Edge to Edge, Shadow Detail, Sharpness, and Temperature settings before you e‑mail the
document.
• Custom Job—This combines multiple scanning jobs into a single job.
• Edge Erase—This removes smudges or marks around the edges of a document. You can choose to remove an equal area
around all four sides of the paper, or pick a particular edge. Edge Erase will erase whatever is within the area selected, leaving
nothing on that portion of the scan.
• Transmission Log—This prints the transmission log or transmission error log.
• Multifeed Sensor—This detects when the ADF picks more than one sheet of paper at a time, and then displays an error
message.
Note: This option is supported only in select printer models.
E-mail guide
Page 4 of 4
To Previous Page
Loading...
