Using SmartSolutions on your printer
Before you begin, make sure:
• Your printer and computer are each connected to the Internet through an Ethernet or wireless connection.
• Your printer is powered on, and at the Home screen.
• You have saved the solutions you have created on the Solution Center, and sent them to your printer.
1 If using a copy or print solution, load paper.
2 If using a copy or scan solution, load an original document faceup into the ADF or facedown on the scanner glass.
Note: The ADF is available only on selected models.
3 From the home screen of your printer control panel, touch SmartSolutions.
4 Touch the solution icon you have created.
Notes:
• To scroll through other solution icons on the printer control panel, touch or .
• If the solution is not shown on your printer control panel, update your printer. For more information, see “Updating
your printer” on page 11.
• To view other SmartSolutions options on your printer control panel, touch More Options.
Using SmartSolutions on your printer
12
To Next Page
Loading...
