3 Select your preferred time interval before the screen saver is initiated.
Selecting Off will disable screen savers on your printer.
4 Touch Accept.
Make the screen saver run longer than the printer's default Power Saver timeout
The screen saver runs for a number of minutes before the printer goes into Power Saver mode. The printer default for
Power Saver is 60 minutes. To make the screen saver run longer, change the Power Saver timeout.
1 From the home screen of the printer control panel, navigate to Power Saver:
> Device Setup > Power Saver
2 Touch your desired Power Saver timeout.
3 Touch Accept.
Modifying printer screen saver settings
14
To Next Page
Loading...
