PCL Support
A-5
ESC
*p#P Push / Pop Palette 2-80 ✓✓✓
ESC
*p#R Set Pattern Reference Point 2-75 ✓✓✓
ESC
*p#X Horizontal Cursor Position (in PCL Units) 2-68 ✓✓✓
ESC
*p#Y Vertical Cursor Position (in PCL Units) 2-69 ✓✓✓
ESC
*r#A Start Raster Graphics 2-77 ✓✓✓
ESC
*r#F Raster Graphics Presentation Mode 2-77 ✓✓✓
ESC
*r#S Raster Width (Source) 2-77 ✓✓✓
ESC
*r#T Raster Height (Source) 2-77 ✓✓✓
ESC
*r#U Simple Color 2-80 ✓✓✓
ESC
*rB End Raster Graphics (Version B) 2-78 ✓✓✓
ESC
*rC End Raster Graphics (Version C) 2-78 ✓✓✓
ESC
*s#I Inquire Status Readback Entity 2-82 ✓✓✓
ESC
*s1M Free Space 2-82 ✓✓✓
ESC
*s#T Set Status Readback Location Type 2-82 ✓✓✓
ESC
*s#U Set Status Readback Location Unit 2-82 ✓✓✓
ESC
*s#X Echo 2-82 ✓✓✓
ESC
*t#H Raster Width Destination 2-78 ✓✓✓
ESC
*t#I Gamma Correction 2-81 ✓✓✓
ESC
*t#J Render Algorithm 2-81 ✓✓✓
ESC
*t#R Raster Resolution 2-77 ✓✓✓
ESC
*t#V Raster Height Destination 2-79 ✓✓✓
ESC
*g#W Set Raster Configuration 2-79 ✘✘✘
ESC
*v#A Color Component One 2-81 ✓✓✓
ESC
*v#B Color Component Two 2-81 ✓✓✓
ESC
*v#C Color Component Three 2-81 ✓✓✓
ESC
*v#I Assign Color Index 2-81 ✓✓✓
ESC
*v#N Source Transparency Mode 2-74 ✓✓✓
ESC
*v#O Pattern Transparency Mode 2-74 ✓✓✓
ESC
*v#S Foreground Color 2-81 ✓✓✓
Table A-1: PCL Emulation Commands (Continued)
✓ Supported
✘ Not Supported
Command
Page numbers reference command descriptions. Printer Model
Function Page
C510(n)
X422
E230, E232, E234(n),
E330, E332n
To Next Page
Loading...
