EasyManua.ls Logo

Lexmark S815 - Cleaning the Scanner Glass; Cleaning the Touch Screen

Lexmark S815
197 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3 Dampen a clean, lint-free cloth with water.
Warning—Potential Damage: Do not use household cleaners or detergents, as they may damage the finish of
the printer.
4 Wipe only the outside of the printer, making sure to remove any ink residue that has accumulated on the paper
exit tray.
Warning—Potential Damage: Using a damp cloth to clean the interior may cause damage to your printer.
5 Make sure the printer is dry before beginning a new print job.
Cleaning the scanner glass
1 Dampen a clean, lint-free cloth with water.
2 Gently wipe the scanner glass clean.
Note: Make sure all ink or corrective fluid on a document is dry before placing the document on the scanner glass.
Cleaning the touch screen
Your printer comes with a touch-screen cloth that can be used to remove fingerprints and smudges on the touch
screen.
1 Make sure the printer is turned off and unplugged from the wall outlet.
CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer,
unplug the power cord from the wall outlet and disconnect all cables from the printer before proceeding.
2 Wipe the touch screen with the touch-screen cloth that came with your printer or with another clean, dry, lint-free
cloth.
Warning—Potential Damage: Do not use liquids, household cleaners, or detergents, as they may damage the
touch screen.
Maintaining the printer
127

Table of Contents

Related product manuals