22. Inspect the inner and outer retaining blades. If they are
bent in any way, they must be replaced, as they will leak.
23. Clean and install the doctor blade. Make sure the contact
spring is on top of the blade.
LEXMARK T650 SERIES • TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
3232 West El Segundo Blvd., Hawthorne, California 90250 USA • Ph +1 424 675 3300 • Fx +1 424 675 3400 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2009 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
24. Place the longer keyed end of the developer roller into the cartridge and install the roller.
To Next Page
Loading...
