Menu item Description
Job Timeout
USB
Off
On
xxx sec
LAN
Off
On
xxx sec
Sets the amount of time in seconds the printer waits to receive
an end-of-job message before canceling the remainder of the
print job
Notes:
• On (60 sec) is the factory default setting for USB.
• On (270 sec) is the factory default setting for LAN.
• When the timer expires, any partially printed page still in
the printer is printed, and then the printer checks to see if
any new print jobs are waiting.
Toner Saver Mode
Off
On
Reduces the amount of toner used for graphics and images
Note: Off is the factory default setting.
88
To Next Page
Loading...
