5 Press the green levers on each side of the waste toner bottle, and remove it.
6 Lift the blue levers on the imaging kit, and then pull it toward you.
7 Press down on the blue levers, grasp the green handles on the sides, and then pull the imaging kit out.
Warning—Potential Damage: Do not touch the underside of the imaging kit. This could damage the imaging kit.
8 Unpack the replacement black and color imaging kit.
Leave the packaging on the developer units.
9 Gently shake the yellow, cyan, magenta, and black developer units side to side.
Maintaining the printer
17
To Next Page
Loading...
