Lexmark X658DFE - Page 101

Diagnostic information 2-67
7462
Go Back
Previous
Next
28x.40
x = bin
number
Left tamper does not
leave home position
failure
Applies to:
StapleSmart finisher
The sensor (left tamper HP)
does not detect that the tamper
has moved from home position.
1. Check all the connections on
the output option controller
card.
2. Check the tamper drive belt
for damage and replace if
needed.
3. Replace the left tamper
motor assembly.
Go to “MFP stapler assembly
tamper drive motor
assembly removal” on
page 4-205.
4. Replace the sensor (tamper
HP).
Go to “MFP stapler assembly
sensor (tamper HP left and
right) removal” on
page 4-213.
4. Replace the output option if
problem remains.
28x.41
x = bin
number
Left tamper does not
move to home
position failure.
Applies to:
StapleSmart finisher
The sensor (left tamper HP)
does not detect that the tamper
has reached home position.
1. Check all the connections on
the output option controller
card.
2. Check the tamper drive belt
for damage and replace if
needed.
3. Replace the left tamper
motor assembly.
Go to “MFP stapler assembly
tamper drive motor
assembly removal” on
page 4-205.
4. Replace the sensor (tamper
HP).
Go to “MFP stapler assembly
sensor (tamper HP left and
right) removal” on
page 4-213.
4. Replace the output option if
problem remains.
Error
code or
message
Error contents Description/Action Possible repair actions