How to fix blurred print on heavy stock with Lexmark X952?
If your Lexmark Printer produces blurred or out-of-focus prints on heavy stock, ensure the Paper Type setting is appropriate for your print material. Note that card stock heavier than 203 g/m2 may not yield acceptable print results. Additionally, printing five sheets, waiting about five seconds, and then printing five more sheets can remove accumulated toner.
What to do if Lexmark X952 printing shows voids?
If your Lexmark Printer's printing shows voids, try changing the Paper Type setting to Plain Paper. Printing five sheets of paper, waiting approximately five seconds, and then printing five more sheets of paper may also resolve the issue.
General| Print Technology | Laser |
|---|---|
| Print Speed (Black) | 50 ppm |
| Print Speed (Color) | 50 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Processor Speed | 1.2 GHz |
| Connectivity | USB, Ethernet, Wi-Fi |
| Operating System Compatibility | Windows, Mac OS, Linux |
| Automatic Duplexing | Yes |
| Output Trays Capacity | 500 sheets |
| Copier Type | Digital |
| Max Copying Resolution | 1200 x 1200 dpi |
| Max Document Enlargement | 400% |
| Max Document Reduction | 25% |
| Optical Resolution | 600 x 600 dpi |
| Modem Speed | 33.6 Kbps |
| Functions | Print, Copy, Scan, Fax |
| Duplex Printing | Yes |
| Memory | 2 GB |
| Interface | USB 2.0, Ethernet, Wi-Fi |
| RAM | 2 GB |
| Media Size | A4, Letter |
| Media Type | Card Stock, Envelopes, Labels, Plain Paper |
| Scanner Type | Flatbed |
| Paper Capacity | 1, 100 sheets |
| Monthly Duty Cycle | 300000 pages |
To Next Page
