To print IPDS jobs, the printer must have the optional Card for IPDS installed, a required* minimum of
user memory (DRAM), and one of the following:
• Standard Network (Ethernet connection integrated into printer system board).
• MarkNet internal LAN print server (optional card providing Ethernet connection).
• Lexmark wireless internal print server.
*Note: A minimum amount of user memory (DRAM) may be required to support IPDS. Refer to Memory
Requirements and Recommendations on page 115.
1.3 Customer Support
Information on how to configure the host and printer during the initial installation is found in the Card for
IPDS, IPDS Printer and Host Setup Guide.
If you cannot find answers in this guide about using the IPDS emulation, or require firmware updates,
please contact your point of purchase, your local Lexmark office, or check the Lexmark support web site
at
http://support.lexmark.com/index?page=localeSelect&locale=en&jumppage=home.
To Next Page
Loading...
