How to fix blurred print on heavy stock with Lexmark Printer?
If your Lexmark Printer produces blurred or out-of-focus prints on heavy stock, ensure the Paper Type setting is appropriate for your print material. Note that card stock heavier than 203 g/m2 may not yield acceptable print results. Additionally, printing five sheets, waiting about five seconds, and then printing five more sheets can remove accumulated toner.
What to do if Lexmark X464 Printer printing shows voids?
If your Lexmark Printer's printing shows voids, try changing the Paper Type setting to Plain Paper. Printing five sheets of paper, waiting approximately five seconds, and then printing five more sheets of paper may also resolve the issue.
General| Print Technology | Monochrome Laser |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Connectivity | USB, Ethernet |
| Maximum Paper Size | 8.5 x 14 inches (Legal) |
| Scanner Type | Flatbed, ADF |
| Scan Resolution | Up to 600 x 600 dpi |
| Fax Speed | 33.6 Kbps |
| Operating System Compatibility | Windows, Mac, Linux |
| Duplex Printing | Automatic |
| Input Capacity | 250-sheet input tray, 50-sheet multipurpose feeder |
To Next Page
