Lexmark X464 - 4028 Compatibility Font Set - (Resident Emulation); Compatibility Font Sets

B.3 Compatibility Font Sets
B.3.1 4028 Compatibility Font Set - (Resident Emulation)
The fonts included below are used by the Resident emulation. For some of these fonts the IPDS
emulation will use an equivalent scalable font. Most of these fonts support the Latin 1 languages.
Typeface FGID Width Pitch/Point Codepage support
(CPGID or G-code)
OCR-B 3 144 10.0 893 (S), 877 (S)
Courier 10 11 144 10.0 G2, 259 (S)
Prestige Pica 12 144 10.0 G2, 259 (S)
Courier Italic 10 18 144 10.0 G2
OCR-A 19 144 10.0 892 (S), 876 (S)
Courier Bold 10 46 144 10.0 G2
APL 12 76 120 12.0 310 (S)
Courier 12 85 120 12.0 G2, 259 (S)
Prestige Elite 86 120 12.0 G2, 259 (S)
Courier Italic 12 92 120 12.0 G2
Prestige Elite Bold 111 120 12.0 G2
Prestige Elite Italic 112 120 12.0 G2
Boldface 159 120 PS G2
Prestige PS 164 120 PS G2
Gothic-text 13 203 108 13.3 G3
Prestige 221 96 15.0 G1
Courier 15 223 96 15.0 G1
Courier 17 254 84 17.1 G1
Prestige 256 84 17.1 G1
Letter Gothic 20 281 72 20.0 G1
Gothic-text 20 283 72 20.0 G3
Gothic-text 27 290 54 26.7 G3
Times™ Roman
5687 40 6 pt * G3
Times Roman 5687 53 8 pt * G3
Times Roman 5687 67 10 pt * G3
Times Roman 5687 80 12 pt * G3
Times Roman Bold 5707 67 10 pt * G3
Times Roman Bold 5707 80 12 pt * G3
Times Roman Bold 5707 93 14 pt * G3
Times Roman Bold 5707 120 18 pt * G3
Times Roman Bold 5707 160 24 pt * G3
Times Roman Italic 5815 67 10 pt * G3
Times Roman Italic 5815 80 12 pt * G3
Times Roman Bold Italic 5835 67 10 pt * G3
Times Roman Bold Italic 5835 80 12 pt * G3
* = For these fonts the scalable Times New Roman™ Typefaces in the appropriate sizes from the
Core Interchange Font Set are always used.
G-codes
G1 = All code pages listed under the Core Interchange Font Set "Latin 1 Country Extended Code
Pages" are supported (see Appendix B.5.1 starting on page 90). In addition, the following
Compatibility Font Set Code Pages are supported: ASCII 367; Austrian/German (Aus/Ger Alt
286), Canadian French (Can. French 276 (Alt), Denmark/Norway (Den/Nor Alt 287),
Finland/Sweden (Fin/Swe Alt 288), Spain / Latin America (Spain Alt 289).
G2 = All code pages in group G1 plus code page (CPGID) 1002.
85