EasyManua.ls Logo

Lexmark X464 - Exception Control

Lexmark X464
119 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Physical Page
The printable area is the physical page (edge to edge). The physical page printable
area is reported to the host.
Note: The Lexmark T65x and X65xde printers can physically print edge to edge.
The logical page is not clipped.
The Lexmark W850 and X86xde printers can physically print edge to
edge. When using “2400 Image Q” print resolution, the maximum width
that can be printed is approximately 11.3 inches (287 mm). Edge to edge
printing is not supported on A3, A4 long edge fed, or Universal media size
greater than approximately 11.3 inches (287 mm) when using “2400
Image Q” resolution.
Full Page
The job is formatted for a page using a printable area of edge to edge. When the
page is printed, the page image is compressed approximately 2% in both the
horizontal and vertical directions and is centered on the page.
Note: Full Page is supported on the T65x, W850 printers and the X65xde,
X86xde MFPs only. On the T65x printers and X65xde MFPs Full Page is
supported on IPDS code level 4.00-133 and above. Selecting Full Page
may decrease performance.
4028 Whole Page
The printable area for the media loaded is reported to the host. A printable area that
more closely matches the values reported by the IBM 4028 printer is reported.
Clipping occurs if data is printed outside the printable area. All four edges will be
clipped.
4028 Print Page
The printable area for the media loaded is reported to the hos. A printable area that
more closely matches the values reported by the IBM 4028 printer is reported. If
the logical page is outside the printable area it is moved down and to the right. The
right and bottom edges will be clipped.
3.3.11 Exception Control
It is often practical to suppress exception reporting on undefined characters and on position errors
(printing outside the valid printable area, VPA). This option overrides the Exception Handling Control
in the IPDS data stream.
Report All*
No suppression of exceptions. Exception reporting is controlled by the IPDS data
stream.
Sup Beyond VPA
Exception reporting on position errors (outside VPA) is suppressed. The printer
IPDS emulation will print the IPDS job but not report "08C1" printable area
exceptions or "0411" bar code exceptions to the host.
Sup Undef Char
If an undefined character is found, exception reporting is suppressed. The printer
IPDS emulation will print the IPDS job but not report "0821" undefined character
exceptions to the host.
Suppress Both
Both position errors and undefined character exceptions are suppressed.
25

Table of Contents

Other manuals for Lexmark X464

Related product manuals