How to fix blurred print on heavy stock with Lexmark Printer?
If your Lexmark Printer produces blurred or out-of-focus prints on heavy stock, ensure the Paper Type setting is appropriate for your print material. Note that card stock heavier than 203 g/m2 may not yield acceptable print results. Additionally, printing five sheets, waiting about five seconds, and then printing five more sheets can remove accumulated toner.
What to do if Lexmark X950 Printer printing shows voids?
If your Lexmark Printer's printing shows voids, try changing the Paper Type setting to Plain Paper. Printing five sheets of paper, waiting approximately five seconds, and then printing five more sheets of paper may also resolve the issue.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Duplex Printing | Standard |
| Optical Resolution | 600 x 600 dpi |
| Max Copying Resolution | 600 x 600 dpi |
| Copier Enlargement | 25% to 400% |
| Data Compression System | JBIG, MH, MR, MMR |
| Fax Transmission Speed | 3 seconds per page |
| Standard Memory | 1 GB |
| Connectivity | Ethernet |
| Operating System Compatibility | Linux |
To Next Page
