Lexmark X950 Supplies Guide

Supplies guide
The following table lists the part numbers for ordering supply items.
Ordering toner cartridges
When 88.xx [color] cartridge low or 88.xx [color] cartridge nearly low appears, order a new
cartridge.
When 88 Replace [color] cartridge appears, replace the specified cartridge.
Estimated cartridge yield is based on the ISO/IEC 19798 standard (with about 5% coverage per color). Extremely low print coverage
(less than 1.25% for a color) for extended periods of time may negatively affect actual yield for that color and may cause cartridge
parts to fail prior to exhaustion of toner.
Recommended toner cartridges and part numbers
Part name Part number
Black high-yield toner cartridge X950X2KG
Yellow high-yield toner cartridge X950X2YG
Magenta high-yield toner cartridge X950X2MG
Cyan high-yield toner cartridge X950X2CG
Ordering a photoconductor unit
When 84.xx [Color] photoconductor low or 84.xx [Color] photoconductor nearly low appears,
order a replacement photoconductor unit.
When 84.xx Replace [color] photoconductor appears, replace the specified photoconductor.
Recommended photoconductor units and part numbers
Part name Part number
Photoconductor unit
• Black
• Cyan
• Magenta
• Yellow
C950X71G
CMY (Cyan, Magenta, Yellow) Photoconductor Kit
Note: CMY photoconductor units may reach end of life all at the same
time.
C950X73G
Supplies guide
Page 1 of 2

Lexmark X950 Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard
Optical Resolution	600 x 600 dpi
Max Copying Resolution	600 x 600 dpi
Copier Enlargement	25% to 400%
Data Compression System	JBIG, MH, MR, MMR
Fax Transmission Speed	3 seconds per page
Standard Memory	1 GB
Connectivity	Ethernet
Operating System Compatibility	Linux