Lexmark X952 - Other Env Size

31
3.5.3 OTHER ENV SIZE
The IPDS emulation uses the envelope size setting specified in the printer menu to determine the
envelope size loaded. The envelope size is returned to the host. A printer envelope size of “Other
Envelope” may be selected in some printer menus when a non-standard size envelope is loaded into a
non-size sensing tray or feeder.
This option allows you to specify the envelope size returned to the host when “Other Envelope” is
selected in the printer menu as the envelope size. The envelope size is specified in 300 dots per inch. See
the conversion example for UNIVERSAL SIZE (section 3.5.2).
Important: A 34 Incorrect Media or paper jam message may be displayed if printing occurs past the
length of the physical envelope. You must specify the actual envelope size to avoid incorrect text
positioning or clipping of text. Some printers do not report an error when the size is incorrect and the text
is clipped.
Product
Menu Option
Value Range
Function
Lexmark C792
Lexmark X792
Lexmark X548
Lexmark 6500e
OTHER ENV SIZE
> Envelope Length
4200*
1500 to 4200
Specifies Other Envelope
dimensions.
See notes below.
OTHER ENV SIZE
> Envelope Width
2550*
825 to 2550
Lexmark C925
Lexmark C950
Lexmark X925
Lexmark X950
Lexmark X952
Lexmark X954
OTHER ENV SIZE
> Envelope Length
5100*
1200 to 5100
OTHER ENV SIZE
> Envelope Width
3510*
900 to 3510
Note: The printer trays and feeders are limited to feeding of specific media sizes. Refer to your printer
documentation when loading a non-standard media size to determine if that media size can be fed
from that tray or feeder.