Lexmark X952 - PAPER HANDLING Menu - Option Descriptions; Offset Stacking; Universal Size

29
3.5 PAPER HANDLING Menu – Option Descriptions
In the following an asterisk “*” indicates the default factory value. Values only display when they are
available on your printer. The selected value for each of these options can be printed; see Printing the
Menu Settings Page on page 10.
3.5.1 Offset Stacking
This option controls the offset stacking function. It is only displayed when offset stacking is supported in
the printer standard bin or when an optional bin with offset stacking capability is installed. Offset stacking
is only available in selected bins and may be limited to selected media.
Bin selection has a higher priority than offset stacking commands in the IPDS job. The job must be routed
to a bin that supports offset stacking and have offset stacking specified in the job before offset stacking
will be performed.
See section 5.1 on page 50 for additional information on offset stacking.
Host Controlled*
Offset stacking is controlled by the commands received in the IPDS job.
Disabled
Offset stacking is not performed. Offset stacking commands received in the IPDS
jobs are ignored.
3.5.2 UNIVERSAL SIZE
The IPDS emulation uses the paper size setting specified in the printer menu to determine the size loaded.
The paper size is returned to the host. A printer paper size of “Universal” is displayed in the printer menu
when a non-standard size paper is detected in an auto size sensing tray or is selected as the paper size
loaded into a non-size sensing tray or feeder.
This option allows you to specify the physical paper size returned to the host when a non-standard paper
size is loaded. The paper size is specified in 300 dots per inch.
Important: A 34 Incorrect Media, or paper jam message may be displayed if printing occurs past the
length of the physical paper. You should specify the actual paper size to avoid errors.
Product
Menu Option
Value Range
Function
Lexmark C792
Lexmark X792
UNIVERSAL SIZE >
Paper Length
4200*,
900 to 6824
Specifies Universal
paper size dimensions.
See notes below.
UNIVERSAL SIZE >
Paper Width
2550*
900 to 2550
Lexmark C925
Lexmark X925
UNIVERSAL SIZE >
Paper Length
5100*,
1749 to 6824
UNIVERSAL SIZE >
Paper Width
3510*,
1062 to 3510
Lexmark C950
Lexmark X950
Lexmark X952
Lexmark X954
UNIVERSAL SIZE >
Paper Length
5100*
900 to 6824
UNIVERSAL SIZE >
Paper Width
3510*
900 to 3510
Lexmark X548
Lexmark 6500e
UNIVERSAL SIZE >
Paper Length
4200*
900 to 4251
UNIVERSAL SIZE >
Paper Width
2550*
900 to 2550