Try one or more of the following:
• Touch Continue to clear the message.
• Complete the Analog Fax Setup. If the message appears again, contact your system support person.
Insert Tray <x>
Insert the specified tray into the printer.
Load <src> with <x>
<src> is a tray or feeder, and <x> is a paper type or size.
Try one or more of the following:
• Load the specified paper in the tray.
• Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find
a tray with the correct paper type and size, it prints from the default source.
• Cancel the current job.
Load <input src> with <Custom Type Name>
Try one or more of the following:
• Load the specified paper in the tray.
• Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find
a tray with the correct paper type and size, it prints from the default source.
• Cancel the current job.
Load <input src> with <Custom String>
Try one or more of the following:
• Load the specified paper in the tray.
• Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find
a tray with the correct paper type and size, it prints from the default source.
• Cancel the current job.
Load <input src> with <type> <size>
Try one or more of the following:
• Load the specified paper in the tray.
• Touch Continue to clear the message and continue printing.
If the printer finds a tray that has the correct paper type and size, it feeds from that tray. If the printer cannot find
a tray with the correct paper type and size, it prints from the default source.
Troubleshooting 222
To Next Page
Loading...
