What to do if Lexmark x9350 All in One Printer is unable to join the network?
First, ensure that the printer settings match those used by the wireless network. Also, make sure the printer is within range of the wireless network. If your network uses MAC address filtering, you may need to provide the MAC address for the printer to your network administrator. Consult the User’s Guide for further details on locating the MAC address.
Why Lexmark All in One network printer does not print?
There could be several reasons why your network printer isn't printing. Check that all cables connected to the printer and the electrical outlet are securely attached. Verify that your network is operating properly. Try restarting your computer. As a final measure, you can uninstall and then reinstall the printer software. Refer to the User’s Guide for detailed instructions on software reinstallation.
Why network name does not appear on Lexmark All in One Printer?
Select 'I want to enter a different configuration', and then click Next. If the network still does not appear: 1. Select 'I want to enter a different configuration', and then click Next. 2. Enter the network name (SSID). 3. Select the appropriate channel for the network. 4. Select the mode for your network. Select Infrastructure if you are using a wireless router. 5. Click Next. 6. Select the type of security you use to protect your wireless network, and then click Next. 7. If you have security, enter the password or network key(s). 8. Verify the settings are correct, and then click Next.
How to fix incorrect language on Lexmark All in One Printer display?
To correct the language displayed on your Lexmark printer: 1. Press the power button to turn the printer off. 2. Press the power button once, and then immediately press and hold the and buttons. 3. Release the buttons. 4. Press the or buttons repeatedly until the language you want appears on the display. 5. Press the or buttons repeatedly until the option for Country is highlighted. 6. Press the or buttons repeatedly until the country or region you want appears on the display. 7. Press the or buttons repeatedly until Set Date and Time is highlighted. 8. Press . 9. Set the date and time. See step 5 in the Setup documentation for more information.
How to troubleshoot Lexmark x9350 All in One Printer when power button is not lit?
If the power button is not lit, try the following: 1. Disconnect the power cord from the wall outlet and then from the printer. 2. Plug the cord all the way into the power supply on the printer. 3. Plug the cord into an electrical outlet that other electrical devices have been using. 4. If the light is still not on, press the power button.
What to do if Lexmark All in One Printer software does not install?
If the software installation fails, first turn off and then restart your computer. Click Cancel on all New Hardware screens that may appear. Then, insert the CD and follow the instructions on the computer screen to install the software. If the Install screen does not appear, insert the CD, click Start, then Run, type D:\Setup (where D is the letter of your CD-ROM drive), and click OK.
General| Copy Resolution | 600 x 600 dpi |
|---|---|
| Fax Modem Speed | 33.6 Kbps |
| Fax Resolution | 300 x 300 dpi |
| Functions | Copier, Fax, Printer, Scanner |
| Max Print Resolution (Color) | 1200 x 1200 dpi |
| Print Resolution (Black) | 1200 x 1200 dpi |
| Scan Resolution | 1200 x 1200 dpi |
| Connectivity | USB |
| Supported Operating Systems | Apple Mac OS X 10.4, Apple Mac OS X 10.5 |
To Next Page
