EasyManua.ls Logo

Lexmark X950 Series - Ordering a Photoconductor Unit; Ordering a Waste Toner Bottle; Ordering Staple Cartridges

Lexmark X950 Series
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Part name Part number
Magenta highyield toner cartridge X950X2MG
Cyan highyield toner cartridge X950X2CG
Ordering a photoconductor unit
When 84.xx [Color] photoconductor low or 84.xx [Color] photoconductor nearly low
appears, order a replacement photoconductor unit.
When 84.xx Replace [color] photoconductor appears, replace the specified photoconductor.
Recommended photoconductor units and part numbers
Part name Part number
Photoconductor unit
Black
Cyan
Magenta
Yellow
C950X71G
CMY (Cyan, Magenta, Yellow) Photoconductor Kit
Note: CMY photoconductor units may reach end of life all at
the same time.
C950X73G
Ordering a waste toner bottle
When 82.xx Waste toner bottle nearly full appears, order a replacement waste toner bottle.
When 82.xx Replace waste toner bottle appears, replace the waste toner bottle.
Note: Waste toner bottle reuse is not recommended.
Part name Part number
Waste toner bottle C950X76G
Ordering staple cartridges
When Staples Low or Staples Empty appears, order the specified staple cartridge.
For more information, see the illustrations inside the stapler door.
Part name Part number
Staple Cartridges‑‑3 pack (Staples G5) 25A0013
Advanced Booklet Staples (Staples G11 and Staples G12) 21Z0357
Maintaining the printer
12

Other manuals for Lexmark X950 Series

Related product manuals