Instant Warm-Up fuser – Saves energy
Power Saver Features – Reduces the power state of the printer after printing when
entering Sleep Mode – adjustable from 1-240 minutes; reduces power state further
when entering Hibernate Mode (a virtual “off mode”)
Scheduled “wake up” – Allows accounts to conserve energy by engaging Hibernate
Mode during periods of the day or week when the printer is not in use and disengaging
Hibernate Mode during work periods
Eco-Mode – Conserves energy and paper through three optional settings:
Energy Saving Mode: Print engine motors do not start until a document is ready to
print, the printer enters Sleep Mode after a period of inactivity and printer control
panel display light is turned off in this mode
Paper Saving Mode: Device defaults to duplex printing and print log features are
turned off
Energy + Paper Saving Mode: Energy and paper saving settings are activated
Quiet Mode – Reduces noise emission by adjusting print speed, disabling advanced
paper start, disabling or minimizing beeps (key press, alarms, etc.), and adjusting fan
speed (Quiet mode may be combined with Eco-Mode)
Multi-Page Printing – Prints multiple page images on one page
Duplex – Prints on both sides of a page
Recycled Paper – Supports the use of recycled content media
Lexmark Solutions – Reduces unnecessary printing and simplifies your work
processes, such as eliminating the need for stocking paper forms
Fax Forwarding – Conserves paper by digitalizing faxes and redirecting to email or file
rather than printing (Hard drive option required)
Print Preview – Conserves paper by allowing users to review print jobs and select
pages needed before printing
Print and Hold – Holds print jobs until released by the user at the printer interface by
entering a pin number (Hard drive option needed)
Distribute Information Electronically – Conserves paper by routing scanned
documents to e-mail, network folders, USB thumb drives, FTP, and LDSS destinations
(Additional options may be required)
To Next Page
Need help?
General
