AUDIO
225
(b) Presetting a station
21X555
1. Tune in the desired station.
2. Push one of the station selector buttons ( 1−6 ) and hold
it until a beep is heard. This sets the station to the button
and the button number ( 1−6 ) appears on the display.
Each button can store one AM station and two FM stations. To
change the preset station to a different one, follow the same
procedure.
The preset station memory is cancelled when the power
source is interrupted by battery disconnection or a blown fuse.
(c) Selecting a station
Tune in the desired station using one of the following methods.
21X556b
Preset tuning: Push the button ( 1−6 ) for the station you want.
The button number ( 1−6 ) and station frequency appear on the
display.
Manual tuning: Turn the “AUDIO−TUNE” knob. The radio will
step up or down to another frequency.
Seek tuning: Push the “SEEK” button. The radio will begin
seeking up or down for a station of the nearest frequency and
will stop on reception. Each time you push the button, the
stations will be searched automatically one after another.
To Next Page
Loading...
Need help?
General
