IN CASE OF AN EMERGENCY
369
PLACING A CALL:
There are 5 ways to place a call.
1. To dial a specific telephone number, say “Dial”.
2. To dial a specific telephone number, say “Digit dial”.
This option is specifically used in noisy situation when the dial
command is not performing well.
3. To use a stored nametag (speed dial), say “Call”.
4. To dial the last number called, say “Redial”.
5. To dial a number a Lexus Link Advisor downloaded to
your vehicle, say “Number recall”.
To dial a number using “Dial”:
1. Press the phone button.
You will hear “Lexus Link ready”.
2. Say “Dial”.
You will hear “Phone number to dial, please”.
3. Say the entire phone number you wish to dial with no
pauses.
Lexus Link will repeat the number, then you will hear “Yes or
No”.
4. Say “Yes” (or “No” to try again).
You will hear “Dialing” and your call (or “No” to try again) will be
connected.
INFORMATION
D If you get a “Pardon” response as soon as you begin
saying the number, this means you spoke too quickly
after the “Phone number to dial, please” response.
Just repeat the entire number again.
D If you gave the entire number to dial and you received
a “Pardon” response, that means the system did not
hear all the digits of the phone number. Say the
number again and be sure you do not pause between
digits.
D After 3 unsuccessful tries (pardons), you will be
prompted to the digit dial format. This lets you dial
each digit individually and should be more
successful for you.
To Next Page
Loading...
