99
2. ROUTE GUIDANCE
ES350/300h_Navi_OM33A07U_(U)
12.
05.11 08:14
3
NAVIGATION SYSTEM
5. SETTING ROUTE
1 Select “Route”.
2 Select “Detour”.
3 Select a screen button to select the de-
sired detour distance.
“1 mile (km)”, “3 miles (km)” or “5 miles
(km)”: Select one of these screen buttons to
start the detour process. After detouring,
the system returns to the original guidance
route.
“Whole Route”: Select to make the system
calculate an entire new route to the destina-
tion.
“A r o u n d Tr a f f i c ” : Select to make the system
search for the route based on the traffic
congestion information received from XM
NavTraffic
®
. For details, see “XM
NavTraffic
®
” on page 341.
DETOUR SETTING
While the route guidance is operating,
the route can be changed to detour
around a section of the route where a
delay is caused by road repairs, or an ac-
cident, etc.
INFORMATION
● This picture shows an example of how the
system would guide around a delay
caused by a traffic jam.
This position indicates the location of a
traffic jam caused by road repairs, an ac-
cident, etc.
This route indicates the detour suggest-
ed by the system.
● When the vehicle is on a freeway, the
de
tour distance selections are 5, 15 and
25 miles (or 5, 15 and 25 km if units are
in km).
● The system may not be able to calculate a
detour route depending on the selected
distance and surrounding road condi-
tions.
To Next Page
Loading...
