Lexus BLUETOOTH SWC - Page 26

Bluetooth
®
SWC 25
1 Your handset device’s Bluetooth
®
feature is off by default. To use your car hands-free system,
you must first turn on the Bluetooth
®
feature in your device. See your device’s user manual.
2 Activate the SETUP menu.
3
When prompted, say “PAIR DEVICE”.
The hands-free system responds: Set your device in search mode and enter 0000 if prompted
for the passcode.
4
Perform a device discovery from the handset device. For details on device discovery for your
handset device, see your device’s user manual.
Your handset device will search for any Bluetooth
®
devices around it. When the search is
complete, it will display a list of the devices it finds. Searching may take a minute or two to
complete.
5
Select Lexus from the list of devices.
6 If prompted by the handset device, enter the passkey 0000, and press the OK key.
7 The hands-free system responds: Pairing complete. Please say a friendly name for the device.
Say a friendly device name for your handset device. For example, you can say ‘Jenny’s Phone’
8
The hands-free system responds: <device name> added.
Some handset devices may ask you to accept the Bluetooth
®
link. Enter YES.
9 After a few seconds the hands-free system responds: Connection complete.
Connect a paired handset device
1 Activate the SETUP
menu.
2
When prompted, say “CONNECT <DEVICE NAME>”, where <device name> is the friendly
name for the handset device you want to connect. For example ‘Connect Jenny’s Phone’.
The hands-free system responds: Connecting <device name>.
Upon successful completion, the hands-free system responds: Connection complete.
Disconnect
the connected handset device
This feature will disconnect the Bluetooth
®
link to the handset device. The handset device will
remain paired with the system.
1
Activate the SETUP menu.
2
When prompted, say “DISCONNECT <DEVICE NAME>”, where <device name> is the friendly
name for the handset device you want to disconnect. For example ‘Disconnect Jenny’s Phone’.
The hands-free system responds: Disconnecting <device name>.
Upon successful disconnection, the hands-free system responds: Disconnection complete.
Removing
a paired handset device
This feature will remove the handset device from the device list. The handset device will no longer
be paired with the hands-free system. To reconnect the handset device the pairing procedure must
be redone.
1
Activate the SETUP menu.
2
When prompted, say “REMOVE <DEVICE NAME>”, where <device name> is the friendly name
for the handset device you want to remove. For example ‘Remove Jenny’s Phone’.
3
The hands-free system responds: Removing <device name>. Are you sure?
4 Say “YES
”.
Upon successful removal, the hands-free system responds: Device Removed.
EN_BT_SWC_IHF1700_OM_Lex2.indd 25 5/15/08 3:49:18 PM