26 Bluetooth
®
SWC
Removing all paired handset devices
1 Activate the SETUP menu.
2
When prompted, say “REMOVE ALL DEVICES”.
3
The hands-free system responds: Are you sure you want to remove all devices?
4 Say “YES
”.
Upon successful removal, the hands-free system responds: All Devices Removed.
Using
the device list
Alternatively the handset devices can be managed using the “L
IST DEVICES” command.
Listing the handset devices in the device list.
1
Activate the SETUP menu.
2
When prompted, say “LIST DEVICES”.
3
The hands-free system begins to list the devices paired: First device <device A>, next device
<device B>… , last device <device D>.
If a handset device is connected to the hands-free system: _connected will be played after that
device is listed.
Note: To move quickly through the device list, you can say ”PREVIOUS DEVICE” or ”NEXT
DEVICE”.
Connect a handset device when listing the devices.
1
List the devices.
2 When the device name is played for the handset device you want to connect, say “CONNECT
DEVICE
”.
The hands-free system responds: Connecting <device name>.
Upon successful completion, the hands-free system responds: Connection complete.
Disconnect a handset device when listing the devices.
1
List the devices.
2 When the device name is played for the handset device you want to disconnect, say
“D
ISCONNECT DEVICE”.
The hands-free system responds: Disconnecting <device name>.
Upon successful disconnection, the hands-free system responds: Disconnection complete.
Remove a handset device when listing the devices.
1
List the devices.
2 When the device name is played for the handset device you want to remove, say “REMOVE
DEVICE
”.
3
The hands-free system responds: Removing <device name>. Are you sure?
4 Say “YES
”.
Upon successful removal, the hands-free system responds: Device Removed.
EN_BT_SWC_IHF1700_OM_Lex2.indd 26 5/15/08 3:49:19 PM
To Next Page
Loading...
