628
8-1. Specifications
LX570_450d_OM_OM60R63E_(GE)
Diesel engine (for EURO IV models*
1
)
*
1
: EURO IV is an emission standard. If it is not clear that your vehicle meets relevant
standards, contact your Lexus dealer.
*
2
: The engine oil capacity is a reference quantity to be used when changing the engine
oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level
on the dipstick.
■ Engine oil selection
“Toyota Genuine Motor Oil” is used in your Lexus vehicle. Use Lexus
approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following
grade and viscosity.
Oil grade: API CF-4, CF or ACEA B3, B4, B5 or JASO DL-0
Recommended viscosity (SAE):
SAE 5W-30 is the best choice for
good fuel economy and good start-
ing in cold weather.
If you use SAE 10W-30 or a higher
viscosity engine oil in extremely low
temperatures, the engine may
become difficult to start, so SAE
5W-30 engine oil is recommended.
How to read oil container label:
The Japanese Automobile Standard
Organization (JASO) DL-0 Mark is
added to some oil containers to help
you select the oil you should use.
Oil capacity
(Drain and refill — reference*
2
)
With filter
Without filter
9.2 L (9.7 qt., 8.1 Imp. qt.)
8.2 L (8.7 qt., 7.2 Imp.qt.)
Temperature range anticipated
before next oil change
Preferred
To Next Page
Loading...
